Menu
Their low built-in height makes the I-Drain® ONE shower drains suitable for new buildings as well as renovations.
Our I-Drain® ONE basic model is made of stainless steel and is available in three variants.
The ONE Linear and ONE Linear+ have a pre-glued waterproofing membrane of 330 mm and 2 metres respectively. Both are available in two heights, namely 54 and 72 mm.
The ONE Chape has a sanded surface for ideal adhesion in the screed and can be supplied in both wall and door models. You may opt for one or two siphons, depending on the desired quantity of water to be drained.
Apart from the basic stainless steel model, a budget-friendly ABS Linear is also available. This has a height of 54 mm and can only be supplied with 1 siphon and pre-glued waterproofing membrane of 330 mm.
Whichever model you choose, you are always assured of 100% watertightness with the I-Drain® ONE. All the siphons are very easy to maintain, since they can be dismounted and detached. You may also choose from various grating designs, so that your walk-in shower will always fit perfectly into your bathroom.
Material: stainless steel
Material grating supports: ABS
I-Cube holders and I-Cubes optional (not included)
Can be connected
Tile finish: 8-30 mm
Minimum height from flange to top of frame: 11 mm 11 mm
Material: stainless steel
Material grating supports: ABS
I-Cube holders and I-Cubes optional (not included)
Can be connected
Tile finish: 8-30 mm
Minimum height from flange to top of frame: 11 mm 11 mm
Material: stainless steel
Material grating supports: ABS
I-Cube holders and I-Cubes NOT included
CANNOT be connected
Tile finish: 8-30 mm
Minimum height from flange to top of frame: 14 mm
Material: stainless steel
Material grating supports: ABS
I-Cube holders and I-Cubes NOT included
CANNOT be connected
Tile finish: 8-30 mm
Minimum height from flange to top of frame: 11 mm
Material: stainless steel
Material grating supports: ABS
I-Cube holders and I-Cubes NOT included
CANNOT be connected
Tile finish: 8-30 mm
Minimum height from flange to top of frame: 11 mm
I-Drain® A.I.O.
I-Drain® PRO
I-Drain® SQUARE
I-Drain® ONE
Detachable siphon
Mounting height
starting at 58 mm
starting at 54 mm
starting at 72 mm
starting at 54 mm
starting at 54 mm
starting at 72 mm
Flow capacity
31 liter/min.
27,5 liter/min.
33,5 liter/min.
24 liter/min.
26,4 liter/min. (1 siphon)
45 liter/min. (2 siphons)
31,8 liter/min. (1 siphon)
49,2 liter/min. (2 siphons)
Water seal height
30 mm
30 mm
50 mm
35 mm
35 mm
Hair grille
i-Drain® A.I.O.
i-Drain® PRO
i-Drain® SQUARE
i-Drain® ONE
